Steel Wire Rope Tow loops are ideal for getting your race car out of the gravel trap.
They have strong breaking strength ideal for when recovering cars and are MSA Compliant.
- MSA compliant to Blue Book Rule Q19.3
- 2.7 tons breaking strain
- Suitable for Front and Rear vehicle anchor points
- Loop Diameter 13cm
- Overall Length – 33cm
Made in England. Wordsworth wire tow loops are MSA compliant to Blue Book rule Q19.1.3 and are suitable for front or rear fitment to all car types. Overall length is 33cm, with a loop diameter of 13cm, the mounting plate bolt-hole centre ID is 15.00mm.
Each towing eye has a breaking strain in excess of 2.7 tons and allows the passage of a cylinder with a diameter of 60mm, situated 25mm forward of the adjacent bodywork – 100 mm above and below this hole must retain clearance to enable the recovery crews to attach straps and shackles to recover the vehicle.
The following MSA Blue Book configuration is strongly endorsed by Wordsworth: Vehicles to be equipped with two front and two rear wire towing eyes positioned equally on either side of the longitudinal centerline. Wire towing eyes are made of 7mm diameter stainless steel wire rope with a 7×19 wire core.
The wire towing eye must be fixed to a structural part of the chassis with a minimum of M10 (Grade 8.8) fixings, the inner part must be flexible in order for the towing eye to be retracted inside the bodywork profile.
Note: Not to be kept near hot vehicle parts (e.g. exhausts).